标题: TC4431/4432 Data Sheet [打印本页] 作者: admin 时间: 2010-4-17 15:50 标题: TC4431/4432 Data Sheet 1.5A High-Speed 30V MOSFET Drivers
The TC4431/4432 are 30V CMOS buffer/drivers suitable for use in high-side driver applications. They will not latch up under any conditions within their power and voltage ratings. They can accept, without damage or logic upset, up to 300mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against up to 4 kV of electrostatic discharge. Under-voltage lockout circuitry forces the output to a "low" state when the input supply voltage drops below 7V. For operation in lower voltages, disable the lockout and start-up circuit by grounding pin 3(LOCK DIS); for all other situations, pin 3 (LOCK DIS) should be left floating. The under-voltage lockout and start-up circuit gives brown out protection when driving MOSFETS.
Parameter Name Value
Power Single
Peak Output Current (mA) 1500
Output Resistance (RH/RL)(Max. @ 25°C) 10/10
Max. Supply Voltage (V) 30
Input/Output Delay (td1, td2)1 (ns) 80/90
Configuration Inverting
Description High-Side/Low-Side MOSFET Drivers
Operating Temp. Range (°C) -40 to 125
Features
Wide Operating Range: 4.5V to 30V
High Capacitive Load Drive Capability: 1000pF in 25nsec
Short Delay Times: < 78nsec Typ.
Low Supply Current
With Logic "1" Input...............2.5mA
With Logic "0" Input...............300µA
Low Output Impedance: 7Ω Typ.
Latch-Up Protected: Will Withstand > 0300mA
Reverse Current
ESD Protected: 4kV
